Vehicle engine cooling systems: assessment and improvement of wind-tunnel based evaluation methods

Vehicle engine cooling systems: assessment and improvement of wind-tunnel based evaluation methods

Ng, E 2002, Vehicle engine cooling systems: assessment and improvement of wind-tunnel based evaluation methods, School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University.

Document type:	Thesis
Collection:	Theses

Attached Files
Name	Description	MIMEType		Size	Downloads
Ng.pdf	Thesis		application/pdf	14.82MB	1862
Ng_Appendices.pdf	Appendices		application/pdf	2.61MB	22

Title	Vehicle engine cooling systems: assessment and improvement of wind-tunnel based evaluation methods
Author(s)	Ng, E
Year	2002
Abstract	The high complexity of vehicle front-end design, arising from considerations of aerodynamics, safety and styling, causes the airflow velocity profile at the radiator face to be highly distorted, leading to potentially reduced airflow volume for heat dissipation. A flow visualisation study showed that the bumper bar significantly influenced the cooling airflow, leading to three-dimensional vortices in its wake and generating an area of relatively low velocity across at least one third of the radiator core. Since repeatability and accuracy of on-road testing are prejudiced by weather conditions, wind-tunnel testing is often preferred to solve cooling airflow problems. However, there are constraints that limit the accuracy of reproducing on-road cooling performance from wind-tunnel simulations. These constraints included inability to simulate atmospheric conditions, limited tunnel test section sizes (blockage effects) and lack of ground effect simulations. The work presented in this thesis involved use of on-road and wind-tunnel tests to investigate the effects of most common constraints present in wind tunnels on accuracy of the simulations of engine cooling performance and radiator airflow profiles. To aid this investigation, an experimental technique for quantifying radiator airflow velocity distribution and an analytical model for predicting the heat dissipation rate of a radiator were developed. A four-hole dynamic pressure probe (TFI Cobra probe) was also used to document flow fields in proximity to a section of radiator core in a wind tunnel in order to investigate the effect of airflow maldistribution on radiator heat-transfer performance. In order to cope with the inability to simulate ambient temperature, the technique of Specific Dissipation (SD) was used, which had previously been shown to overcome this problem.
Institution	RMIT University
School, Department or Centre	School of Aerospace, Mechanical and Manufacturing Engineering
Keyword(s)	Automobiles--Radiators--Testing Wind tunnels Automobiles--Motors--Cooling systems--Testing

Access Statistics:	138 Abstract Views, 1886 File Downloads - Detailed Statistics
Created:	Wed, 16 Feb 2011, 11:05:33 EST by Sian Dart